M
madsigntist
Well-known member
Guage Cage for M8. Re-mounts your instrument pod up at an angle for better viewing and doubles as a vent for under hood heat!
I could not afford the AMP cage, so...here's a pic of my new gauge cage thingy. Spent a few hours designing and cutting a few tests on the cnc. I think I have a pretty decent unit now. I cut it from .080 AL, tried .125 but it seemed a bit oversized. I put some screen/mesh on the opening cause thats a pretty big hole. I also made 2 cradles-one for a standard gauge and one for an SP gauge. Since the cradle rotates, it can be fixed at any angle. Your preference.
Units includes stainless hardware and installation instructions.
$85 shipped in the US.
PM me if you're interested
I could not afford the AMP cage, so...here's a pic of my new gauge cage thingy. Spent a few hours designing and cutting a few tests on the cnc. I think I have a pretty decent unit now. I cut it from .080 AL, tried .125 but it seemed a bit oversized. I put some screen/mesh on the opening cause thats a pretty big hole. I also made 2 cradles-one for a standard gauge and one for an SP gauge. Since the cradle rotates, it can be fixed at any angle. Your preference.
Units includes stainless hardware and installation instructions.
$85 shipped in the US.
PM me if you're interested
