2010 M/ CF 1000 motor. make offer
I have a 2009 1000, last year I lost the bottom end, and put a new bottom end on it. This motor had 1900 on it when It went down (used up some old gas like a dumbazz
), and a few weeks ago I looked & saw 2400 on the ODO. The slide was a ride or two after that.
I put new pistons, and one new jug on it.
The ONLY thing that is not new on this motor is ONE jug that was in perfect shape, so there was no reason to pull it. Before it went into the sled We did all TI bolts ($500 kit), did the BDX oil delete with a zerk in the bottom of the cavity with grease in the center cavity so there will be no issues with wear. This sled currently has bdx PV deletes on it, but I have the servo & a NIB set of cables that could go back in if you want.
This motor has not been boosted or piped, and it has the tail end of last year, and about 5 rides this year on it. 600 miles is on the big end of what this could have on it. I bought this bottom end last year & can have Michelle (free agent) and my mechanic (MPM) corroborate when this was done. This is NOT some "yeah... sure... it's got low miles... RIGHT...
" kinda deals! 
Also have
ECU is sold
The harness is not good, I was in a slide which ripped the hood open & tore it.
servo motor, valves, new cables. (may sell with motor)
throttle bodies (may sell with motor)
Y pipe with weld in bungs, ($80)
141 powerclaw track ($475)
primary, also new last year (may sell with motor)
float skid, suspension only, rails got bent in rear ($350)
One good 19" float which fits cf or HCR, not sure what else uses 19" (make offer)
09 DD with new bearing, but I may keep the gears, (was not in sled, I'm keeping DD lite & shaft) (make offer)
09 track shaft (offer)
one side of HOLZ a arms ($200)
Attitude box, brand new, never installed. ($275)
NIB RSI black handguards, work with any powermadd mounts ($15)
If you're about to make me an offer... make it real. IF you lowball me with a STUPID number... I'm not even gonna respond. I'm busy as heck & have a lot going on! I'm not looking for retail prices here, I'm realistic, but if you're gonna pm me & offer $1000 for a motor with $500 worth of ti along with it... don't.
If you see one of my prices & think it's high... let me know, I may be negotiable.
Kaleb
I have a 2009 1000, last year I lost the bottom end, and put a new bottom end on it. This motor had 1900 on it when It went down (used up some old gas like a dumbazz
), and a few weeks ago I looked & saw 2400 on the ODO. The slide was a ride or two after that.I put new pistons, and one new jug on it.
The ONLY thing that is not new on this motor is ONE jug that was in perfect shape, so there was no reason to pull it. Before it went into the sled We did all TI bolts ($500 kit), did the BDX oil delete with a zerk in the bottom of the cavity with grease in the center cavity so there will be no issues with wear. This sled currently has bdx PV deletes on it, but I have the servo & a NIB set of cables that could go back in if you want.
This motor has not been boosted or piped, and it has the tail end of last year, and about 5 rides this year on it. 600 miles is on the big end of what this could have on it. I bought this bottom end last year & can have Michelle (free agent) and my mechanic (MPM) corroborate when this was done. This is NOT some "yeah... sure... it's got low miles... RIGHT...
" kinda deals! Also have
ECU is sold
The harness is not good, I was in a slide which ripped the hood open & tore it.
servo motor, valves, new cables. (may sell with motor)
throttle bodies (may sell with motor)
Y pipe with weld in bungs, ($80)
141 powerclaw track ($475)
primary, also new last year (may sell with motor)
float skid, suspension only, rails got bent in rear ($350)
One good 19" float which fits cf or HCR, not sure what else uses 19" (make offer)
09 DD with new bearing, but I may keep the gears, (was not in sled, I'm keeping DD lite & shaft) (make offer)
09 track shaft (offer)
one side of HOLZ a arms ($200)
Attitude box, brand new, never installed. ($275)
NIB RSI black handguards, work with any powermadd mounts ($15)
If you're about to make me an offer... make it real. IF you lowball me with a STUPID number... I'm not even gonna respond. I'm busy as heck & have a lot going on! I'm not looking for retail prices here, I'm realistic, but if you're gonna pm me & offer $1000 for a motor with $500 worth of ti along with it... don't.
If you see one of my prices & think it's high... let me know, I may be negotiable.
Kaleb
Last edited:
