I got me a pro and got it home. It ran fine and idled at 1750 rpm or so like it should. Then i pulled side panels off and the hood and washed the engine compartment off real well to get oil out and just to get clean so i could clean power valves. I got that over with and started it and it didnt want to idle anymore. So i figured i got water in some electrical plugs, so i took all them apart blew them out with compressor put dialectric greece on them and put back together. Still wont idle on its own. Could it be a fuel issue all the sudden like a plugged fuel filter? any suggestions would be handy. Thanks
Low idle after engine wash???
- Thread starter Ryker Peterson
- Start date
I put new plugs too?
washed the engine compartment off real well...........
What did you wash it with and did you cover the airbox?
What did you wash it with and did you cover the airbox?
Pressure washer with heat and ya I didn't get any in airbox.
most likely the tps has moisture in it..let it dry good and see if it doesnt work fine....if it doesnt then you need to test it..but most likely the tps....
X2 ^^^^ I have seen moisture in the TPS harness connector do the same thing your describing. I would use compressed air to dry the TPS harness and connector.
Ok I will give it a shot and see how it goes.
