I am trying to get all of my coolant out because i want to try engine ice but i am having trouble getting the last bit out. I have a 2003 700 RMK, any tips would be helpful.
Looking for tips on Flushing my Coolant.
- Thread starter edsst21
- Start date
V
volcano buster
Well-known member
I like to use my wet/dry shop vac. Take the liner or anything in the tank that you don't want to get wet. Pull the radiator cap and start sucking. I find it easiest to vent the top of the thermostat housing (small bolt) and vacuum for a while. Turn it off and let it set for maybe 10 minutes then do it again. This gives any residual some time to pool and collect then get pulled out. This is the fastest and cleanest way I have found to do it and then all you need is a funnel to pour the old fluid into for recycling. There shouldn't be enough of the old anti-freeze in the system to worry about when you go to install the new batch with any additives.
