looking for tie rod ends

[Jay]

Does anyone know where I can find tie rod ends? I need a left hand 7/16 nft heim joint for a radius rod and a left hand 7/16 nft x 3/8 nft right hand tie rod end. Are there any places out there that specialize in this kind of stuff? Thanks for any help. Jay

 

[Blk88GT]

A quick Google search revealed: http://www.vxb.com/page/bearings/CTGY/HR

Although I have no experience with their heim joints.

You might have better luck searching for race car supply stores as these joints are used quite heavily in that industry.

 

[Jay]

I tried a google search but didn't find that place, thanks for the help.

 

[wjl]

links
https://www.pegasusautoracing.com/group.asp?GroupID=RODEND

or Summit racing . com

 

[Scott]

For sleds? Contact Wimpy on here.

 

[EagleRiverDee]

Heim is distributed by bearing suppliers. If you have a US Bearings, Motion Industries, Kaman, or Applied Industrial Technologies...or a local bearing house...try them.

 

[Jay]

Thanks for the tips guys, really appreciate all of them, yes I have tried to contact wimpy, just haven't heard back from him yet. I deal alot with kaman bearing in terrace (120 miles from here) didn't think of them. When your working on a mod someone else built you just never know what your going to run into.

Clickable links are a godsend to a computor illiterate like me. thank you very much.

 

[Dogmeat]

Does anyone know where I can find tie rod ends? I need a left hand 7/16 nft heim joint for a radius rod and a left hand 7/16 nft x 3/8 nft right hand tie rod end. Are there any places out there that specialize in this kind of stuff? Thanks for any help. Jay

Will the ones off a 2006 Polaris 6/7/900 RMK work? I have a set of them for cheap.

 

[t stone]

Not sure what size they are but I have all the lower steering componants off an 08 Dragon 800. PM me with offer

Stone

 

[mountainhorse]

Rod End supply
http://www.rodendsupply.com/index.php

Aurora Bearing.
http://www.aurorabearing.com/






.

 

[wrenchyanker]

Go to Kenworth or some other large truck shop as them heim joints are used in clutch linkage.

 

[Jay]

ttt