Looking for Maps for Power Commader V

[MTSledder94]

Im looking for a good map for a power commander v.
I have an SLP pipe and can and im using their map right now but it seemed to bog down really bad in the mid range. I ride around western montana so the elevation is about 3000-6000 ft. Its on a 2011 polaris Pro RMK Assualt

 

[o2bncamo]

I would try it without the PCV, put it in ethanol mode and run it.
If you have just the pipe and can you don't need much extra fuel. I'm guessing you have something else giving you the bog. You can eliminate the PCV and map as the problem.

 

[jerrydecoy]

Call Jim at Dynotech!

 

[xcmark]

Members of DTR can ask Jim for PC maps and he may or may not have a setup to help you. I know he has a 2013 map , every year ECM is different. SLP map may have to much midrange fuel , have you looked at the map to see where the fuel curve is being added or subtracted ?

 

[The Bob]

SLP maps are known for being really safe. I am guessing they are throwing a lot of gas at the midrange. Initially these 800 CFI needed alot in the midrange stock(2009), but as of 2015 they really need nothing added midrange. Not positive on the 2011's but sounds like that is probably the issue. Post a screen shot of their map. I don't want to tell ya to run without the PCV until I see their map and how much they are adding on top (guessing not much, if not subtracting).

 

[BILTIT]

Jim does have an slp map for the 2011, i got mine from him.

 

[Nooby]

Dynotech