looking for a place to put your extra spark plugs?

[m8sandman]

the tool kit has plenty of room to hold your extra plugs, in fact i think theres only 3 or 4 tools in there!!! so you may also want to throw a couple of extra wrenchs in

 

[crf118r]

That's where mine went!

 

[catfreak]

the tool kit has plenty of room to hold your extra plugs, in fact i think theres only 3 or 4 tools in there!!! so you may also want to throw a couple of extra wrenchs in

Your the man Ron..... But now that some of us ex Cat guys are on Poo's I didnt think we needed tools or spare plugs

 

[GMCRMK]

Your the man Ron..... But now that some of us ex Cat guys are on Poo's I didnt think we needed tools or spare plugs

I've noticed alot of "other brand" related user names over here lately. Welcome to good side

Back to topic: It's nice with the EFIs you don't have to change plugs on the hill that much anymore. I'll still carry a couple in my tool bag though.

 

[mountainhorse]

Post up some pics guys... everyone loves pics

 

[MGM]

Another cat guy here. In 2600 miles I never replaced a plug.

*EDIT I should have said I never Fouled a plug. I did replace them voluntarily.

 

[crf118r]

Maybe it's time! Who know's, It may run even better

 

[catfreak]

Post up some pics guys... everyone loves pics

Its all torn apart. Just finishing up on the new SLP intake and then the Holz vents are next.

 

[m1kflyingtiger]

Another cat guy here. In 2600 miles I never replaced a plug.

Mine did great with plugs. Hardly ever had to change them. I think I only went through three sets...yeah a fresh set for each of the three motor rebuilds in the 1000 miles I owned the sled... The M chassis was great, and when she ran right it was a blast, but....
It's gonna be q great winter back with Polaris

 

[GMCRMK]

I had these spark plug carriers already and just zip tied them to a harness. I also zip tied a pouch under the hood that holds a tow rop, some bailing wire and a siphone hose for emergencies.

 

[crf118r]

I had these spark plug carriers already and just zip tied them to a harness. I also zip tied a pouch under the hood that holds a tow rop, some bailing wire and a siphone hose for emergencies.

Looks like your plugs already took out your clutches!

 

[GMCRMK]

Looks like your plugs already took out your clutches!

Nah, I removed them to save 15 pounds of rotating mass. Actually they're boxed up and off to Carl's tomorrow

 

[crf118r]

You've been busy on that Pro I see! Like the tether lo-cal. I wanted to put mine in the center, but the v in the middle seemed like a bad idea. I'm glad the Holz is flat so I can copy you!

 

[m8sandman]

You've been busy on that Pro I see! Like the tether lo-cal. I wanted to put mine in the center, but the v in the middle seemed like a bad idea. I'm glad the Holz is flat so I can copy you!

i'm putting the holz on mine but on my buddies i just put it on the flat to the right of the bevel, not centered but fits flush. also the flat washer was too thick to let the plug push in the contact, loose without one so had to find the perfect one

 

[m8sandman]

You've been busy on that Pro I see! Like the tether lo-cal. I wanted to put mine in the center, but the v in the middle seemed like a bad idea. I'm glad the Holz is flat so I can copy you!

also plan on putting a goggle bag on the right support.