Anyone know where the plug is located for a tether on a 2020 -850 ?
Location Tether plug
- Thread starter ENDO1
- Start date
Inside the little Velcro bag highlighted by the circle in the picture
850 & 800 PIDD Cables
www.cvcustoms.com
Get Some Get There
850 & 800 PIDD Cables
www.cvcustoms.com
Get Some Get There
Just installed mine yesterday.
No need to follow all of the instructions that come with the factory tether...
Take side panels off, unplug the hood and take off, undo the two Torx 40 screws holding the dash down, pop the rivets out of the drivers left hand side knee pannel. Drill a 1/2in hole wherever you want... make sure not to drill into wires lol. Connect it right up. The plug for the tether has a grey cap on it. Remove the grey cap and it plugs right into the exposed orange female end.
No need to follow all of the instructions that come with the factory tether...
Take side panels off, unplug the hood and take off, undo the two Torx 40 screws holding the dash down, pop the rivets out of the drivers left hand side knee pannel. Drill a 1/2in hole wherever you want... make sure not to drill into wires lol. Connect it right up. The plug for the tether has a grey cap on it. Remove the grey cap and it plugs right into the exposed orange female end.
Thank You !
