List of differences in MH kits year from year wanted

[Robster]

Hi guys,

I am curious about what changes have been made from year to year on the MH kits.

Anyone that has the complete "list", or can we make one together?
I want to know everything from different bearings, tracks, shocks, chains, sprockets etc etc.

//Rob

 

[Timbersled]

MH changes

2010/2011 Season - 2011 Model Year
1st year of MH production

2011/2012 season - 2012 Model year

1. Wider ski spindle ears allowing more adjustment for better trail handling
2. Went from aluminum sprockets to hardened steel
3. New EK O-ring chain
4. Brake caliper modification to accomodate stock master cylinders
5. Fox Zero Pro sprung shocks
6. Hard anodized shafts in suspension
7. New Wider limiter strap instead of 2 narrow ones

2012/2013 season - 2013 Model year

1. 10" Wide T/S custom designed ski
2. New custom made tracks with 1/4" deeper lug, wider pitch and flexible sides
3. New custom built slide rails
4. Recalibrated suspension for better overall ride
5. Grease-able bearings

We are striving to make all of our modifications upgradeable so you can keep your kit as up to date as you want to. We are also working on new modifications and improvements all the time to make the MH better each year. Your comments and suggestions are always welcome.

posted by dave @ timbersled

 

[Robster]

Thanks Dave,

I am also interested on the two years before last years kit and this years kit.

Are there anything to look out for or upgrade especially if you got a 2 year old kit with fox floats in it?

Rob

 

[Rush44]

If you have the 2011 kit you want to upgrade all 3 sprockets most of all. Also check the bearings since they would more likely have higher miles on them.

 

[Timbersled]

All of the items listed are updates to the original kit with Fox Floats. We did not make a kit 2 years before last years kit. That would have been the 2009/2010 season and we were designing the kit that year.

 

[KAWGRN]

Dave send me a belt drive kit for the chain case!and nitrous tank mounts on the rear frame