Lets talkTurbo Nytro 180-200 hp clutching

[TurboM700]

What everyone with a "pump gas" nitro running for clutching

Primary spring
weights

Secondary spring
Helix

Please include
Eleavation
Boost
Engagment

I currently have a 2008 nytro that after buying a used kit I ended up making my own kit out of the pieces. Its basically a Mits 16g running 8-10 pounds non intercooled.

I have looked into STM, D&D, Supertips, Dalton weights and I want to see what others are using before I go and shell out 200 bucks. I read the Supertips-Dalton thread but I have also heard good things about STM and Push recommends D&D.

I want something with some adjustments as I ride here in MN and out West. (unload at 8k ride to 10k.

Thanks again
Mike

 

[Norton450]

When I used to run 10lbs this setup worked great
B-W-B primary
60g Supertips loaded with 3 grams in the heel @ 8000. When I rode it back in MN I would put an additional 7 grams in the tip.
EPI Purple Secondary @ 1-0
Shockwave @ 1.5

 

[D4ngerruss]

Contact Push turbo. They sell a 45 degree helix and will tell you proper weights.