laodez

[redhawk24]

LOADEZ

I am starting to release these for sale if interested pm me and I will send you my phone number. They are built out of 1/4 inch aluminum fully welded, come in 2 different mounting configurations. $895.00

view video: http://www.youtube.com/watch?v=e7HWnBy52Wg

 

[redhawk24]

Here is the two different mounting methods. the one that is for the receiver is a prototype and there is changes to it. Instead of being its own receiver it will slider over your receiver.

 

[ARMYSLEDER]

It cost me 89 bucks to build this. How come so much? $895 is a little steep isnt it?

 

[redhawk24]

It cost me 89 bucks to build this. How come so much? $895 is a little steep isnt it?

We ran with your set up for years and it dose work but you need to look closer at the video. Once you are loaded you do not need to figure which side of the sled you are going to scratch up with the ramp.Also they are made to last a life time not just a few years.

 

[Gmiller]

I am starting to release these for sale if interested pm me and I will send you my phone number. They are built out of 1/4 inch aluminum fully welded, come in 2 different mounting configurations. $895.00

view video: http://www.youtube.com/watch?v=e7HWnBy52Wg

That is styling!! Now for the big question, I have a tonneu cover on my full size dodge 2500. Can one be built and would it work even with the extra height getting onto the top of the tonneu?

 

[backcountryislife]

That is styling!! Now for the big question, I have a tonneu cover on my full size dodge 2500. Can one be built and would it work even with the extra height getting onto the top of the tonneu?

You have the big $$ to spend on a "premium snowest membership"... so just get a sled deck & stop *****footing around there big spender!!!

Plus, with a deck you get a tonneu cover AND a ramp... all in one!!

 

[redhawk24]

That is styling!! Now for the big question, I have a tonneu cover on my full size dodge 2500. Can one be built and would it work even with the extra height getting onto the top of the tonneu?

If your sled fits with the tonneu cover then it may work ???

 

[Gmiller]

You have the big $$ to spend on a "premium snowest membership"... so just get a sled deck & stop *****footing around there big spender!!!

Plus, with a deck you get a tonneu cover AND a ramp... all in one!!

HEY..... The reason i don't already have one is i want a functional tonneau cover to keep all my crap. I need a rack to hold my sled on top of the tonneau cover. And the big $$$ thing? Come on, i own a 900. I have to have a membership to view the info to keep that thing running..... HA

 

[seth25]

Laodez

I thought this was going to be some sort of storm system cousin of La Nina that is coming this week to dump three feet of fresh.

La Odez

Or maybe just loadez spelled wrong. Ha.

 

[ARMYSLEDER]

We ran with your set up for years and it dose work but you need to look closer at the video. Once you are loaded you do not need to figure which side of the sled you are going to scratch up with the ramp.Also they are made to last a life time not just a few years.

Never scratch up my sled, I used a ratchet strap and snugged ramp to inside of truck bed then put my gear bag inbetween sled and ramp to protect sled from ramp just incase. Worked great and easy to make.

 

[AndrettiDog]

It cost me 89 bucks to build this. How come so much? $895 is a little steep isnt it?

So are you suggesting he sell it in the neighborhood of $89? No offense but I'm pretty sure there are plenty people who can't build their own. A guy should be allowed to make a little coin for his effort. I have an aluminum ramp that cost $350 (not by me!) and it doesn't do near as much. If he can come up with a way for it to fit into the truck with the tailgate up (w/o a sled) then it could be a pretty cool setup.

 

[trackvs2wheels]

Ya ARMY...get off his back

This is America my friend...you know, the one that you defended for 5 years so that people can come up with these sort of ideas and try to sell them to us stupid sled heads

 

[redhawk24]

I appreciated the support and so do I the service that armysledder has given.All I am trying to do is give my fellow sledders a way of loading there sleds with ease. I have spent lots of time developing this product so that it works as good as it can. And the video is not just the best that it loads it loads this way every time. The ramp only weighs 80# and removes from your truck real easy and stores in a small area as we live in smaller space in the mountains storage is an issue. A set of casters can be added so that you can store your sled on it in the garage and be moved about. Again thanks for the support.

 

[redhawk24]

I am starting to release these for sale if interested pm me and I will send you my phone number. They are built out of 1/4 inch aluminum fully welded, come in 2 different mounting configurations. $895.00

view video: http://www.youtube.com/watch?v=e7HWnBy52Wg

savings on some material so I am passing it along $849.00

 

[CO_MapMaker]

Loving it, hitch mount was the way to go for me.

 

[redhawk24]

Thanks Rob fellow eagle county sled neck

 

[AndrettiDog]

Loving it, hitch mount was the way to go for me.

If it can hold that heavy sled it can hold any of them right? Just kidding, I like the looks of that sled.

So is the hitch mount adjustable for different bumpers?

 

[redhawk24]

yes it is adjustable with only needing to drill two holes in the support feet.

 

[redhawk24]

Another happy owner Thanks Dan

 

[P Money]

Those look sweet, if I had a pickup that's the way I would go!! Stuck with an SUV and a trailer...
P