Kx450 peg height with timbersled

[dirtbiker250]

I've searched and can't find anything! Could someone with a 12-13 kx450 measure from the ground to top of the pegs with the bike resting by itself ! I have a risk racing tie down I want to use and just want to know if it'll work if pegs aren't to high! Also if someone has a 14 yz450f that they could possibly measure. That would be awesome thanks guys !!

 

[Uncle si]

I've searched and can't find anything! Could someone with a 12-13 kx450 measure from the ground to top of the pegs with the bike resting by itself ! I have a risk racing tie down I want to use and just want to know if it'll work if pegs aren't to high! Also if someone has a 14 yz450f that they could possibly measure. That would be awesome thanks guys !!

The '12 kx450f is really close to the same height as it is with wheels. I can't measure it now while it is in pieces....

 

[dirtbiker250]

Just measured mine with wheels on. 17 1/4 inches to top of pegs

 

[Arn]

We run the Risk Racing Lock and Loads and they work really well. Had to raise them up about 4" to work properly. We use it with a RMZ, YZF, and a few different KTM's. It did not work with a 300 KTM because it wouldn't clear the pipe. I ran Superglides right up and thru the middle. Can drive the bike in and they push out backwards easily. No need for straps.