KTM 250 300 jetting?

[Snwbiker]

If you have any specs on what you have been using for jetting in a 250 or a 300 2 stroke KTM with stock carb please post what you have come up with for jetting. Any temp and elavation will work for a base line for jetting.
Or even if you think you recall what you have would be nice.
Thanks.

 

[TillTheEnd]

At sea level, 15-30 degrees stock 36 carb I'm running JB Blue Desert race needle 1 clip from full rich, 180 main, 38 pilot, I don't recall where the Air screw is. I had quite a few issues till I ditched the stock intake and went with a Uni snow pod and prefilter.