Klim F4 Goggle recs?

[thebigtreeman]

I'm thinking of joining the "whip it good" crowd and getting the Klim F4 helmet. I need goggle recommendations.

Some people have said the Spy Magneto & Omega's have fit well. What about the 509's? Anyone using those and if so, how do they fit?

What else is working well?

 

[phatty]

I'm thinking of joining the "whip it good" crowd and getting the Klim F4 helmet. I need goggle recommendations.

Some people have said the Spy Magneto & Omega's have fit well. What about the 509's? Anyone using those and if so, how do they fit?

What else is working well?

Scott high voltage III
Spy targa 2

i have heard as cool as goggle as they are, the 509s dont fit well in the klim helmet.

 

[thefullmonte]

I found the Spy's you mentioned seal the best on that helmet. The large eyeport creates a challenge when trying to get goggles to seal. If their breath guard just came up a bit higher, most goggles would work.
The 509's are similar in design to Oakleys which are very narrow from top to bottom. This will make it difficult to seal.
I would think the 80's series Scott goggle would work and probably the Smith Warp as well. I haven't personally tried either of these as they just aren't my favorite goggle.

 

[thebigtreeman]

Out of stock

Phatty & Monte - Thanks for the quick replies. I think I'll go with the Spy's and see how they work out.

Just checked your store and the Spy goggles sure took a hit!! None in stock!!

 

[High Powder]

I'm trying to get the Smith Warps to work, but am about out of patience. Have tried all combinations of Smith deflector, Klim deflector, etc.

 

[Bucket!]

I have both the spy omega's and blizzards and the blizzards seems to fit very well as I have not even used my omega's yet this season

 

[Dogmeat]

Don't buy the 509s for use the the Klim F4 ... they are simply too small of goggle. I've been riding with them all winter and I've now tried three different kinds of facemask with them and I have frozen my face off with each one.

I'll be switching back over to the Scott 89xi's I used to use on my HJC helmet ...