Kill switch/tether install

[rwsqurl153]

So in my efforts to not let my new to me sled go down a mountain out of my control ive purchased a kill switch or tether. Well the directions are piss poor and say to cut wires!! oh man im not into cutting anything!! so I need help anybody done this mod or know of another thread that talks about it.

My 900 has what looks like the exact same plug coming from the wires leading to the key switch that is on the new thether and im wondering if this is a factory plug for this upgrade??

Any help would be much appreciated!!

 

[Newfusion900]

Yes if it is a polaris tether all you need to do is plug it into the connector beside the key switch. Start the sled and pull the tether to make sure it shuts down.

 

[r.c.rob]

And if it is not a polaris switch
Put spade conectors on your aftermarket switch
Then plug them to the conector by your key switch.
Rob

 

[05900]

And secure them so they don't come apart!!