Jetting and carbs?

[JustinB]

Anyone out there know who can help me with my carbs.

 

[sled_guy]

You are going to need to give a little more details than that. What sled? Which mods? What's the issues you are having?

sled_guy

 

[JustinB]

You are going to need to give a little more details than that. What sled? Which mods? What's the issues you are having?

sled_guy

02 summit 700 with a can.

It started acting like its getting to much fuel I am on it and blip the throttle it bogs out and loses all its power.

 

[SledGimp]

02 summit 700 with a can.

It started acting like its getting to much fuel I am on it and blip the throttle it bogs out and loses all its power.

My sones was doing the same thing and when I opened the top of one of the carbs we found a broken cable.

 

[JustinB]

My sones was doing the same thing and when I opened the top of one of the carbs we found a broken cable.

Thanks sled gimp pulled my cap off and sure enough cable was haning on by one strand.

 

[SledGimp]

Thanks sled gimp pulled my cap off and sure enough cable was haning on by one strand.

No prob, when you get a new cable on there don't forget to give it plenty of slack to start, get the pistons sitting even against the bottom of the carb with the idle adjuster screwed all the way out. start her up and adjust the idle. I would say just bring it over and I will be happy to help but Heber is a long drive.