jetting 07 rev

[moose450]

I have an 07 rev that I have had a lot of problems with it loading up when I let off from full throttle. I got upset and put a set of v-force reeds and a snostuff rumble pack on it. I am just wondering if anybody would know what I should be running for jetting roughly with those upgrades?

 

[deep_doo]

its probably not even a jetting problem more likly a rave not working right check all the hoses to them look for lose or pinched lines you might have to take the air box out to see the line coming from the crank case and also check the senser on the top of the air box before you take it out maybe its off than if nothing found wrong the stock jetting is 470 470 with those up grades uyou shouldnt need a jetting change but if you want to feel safe i would only jump 1 size to 480 480

 

[moose450]

tahnks

thanks for the help. i just rebuilt the top end last weekend and checked out all those lines and they all looked good. went threw the power valves and they both looked real good also. so I am thinking on just putting in new plugs and seeing if it will clean out and then go from there. if that is the stock jetting is that for see level or is that for higher elevations.

 

[deep_doo]

thanks for the help. i just rebuilt the top end last weekend and checked out all those lines and they all looked good. went threw the power valves and they both looked real good also. so I am thinking on just putting in new plugs and seeing if it will clean out and then go from there. if that is the stock jetting is that for see level or is that for higher elevations.

3000' on up not sure if its the same jetting under 3000' good luck