IQ SLP Air Horn Install -supplied sealing tape/flange question

[go high fast]

Step four says apply the supplied sealing tape to the flange of the airhorn and rivet into place using the supplied rivets. Where is the sealing tape attached to?

 

[slash]

seals the horn to the air box

 

[go high fast]

Thank you. I am clear on its purpose. I am not clear on where it is applied to the airhorn.

 

[Stumpgrinder]

You stick it on the flat flange of the horn, non foam side, over the rivet holes. Rivet through it for the seal. Tape is about 1/2" wide, flange is about 1/2" wide

 

[NapaMatt]

Also...

Make sure you just take off the Air box shelf out from the hood...


Need to get all the plastic out of there from hen u drill the holes....

 

[richracer1]

Step four says apply the supplied sealing tape to the flange of the airhorn and rivet into place using the supplied rivets. Where is the sealing tape attached to?

right here, "Step four says apply the supplied sealing tape to the flange of the airhorn".

 

[go high fast]

ok guys........i think i got it.

thank you!!