Injector Connection Seal?

[mt.aero]

Since I'm dropping in the Indy Dan long rod motor I'm in the process of going through everything and cleaning. I just did an injector cleaning and noticed that Polaris uses some type of hardening glue/sealant on the injector electrical connections. Do you guys know what type of glue/sealant it is and any reason I can't or shouldn't use the old tried and true dielectric grease?

Thanks

 

[snow4shover]

You don't need to put any glue on the connectors. Polaris does this to keep the color coded injectors paired together. If you wanted to put some sealant on the connector that is fine but make sure you only get the sealant on the seal inside the connector and not directly on the metal contacts.

 

[mt.aero]

Thanks, just what I needed to know!

 

[mountainhorse]

I've never "unglued" them when sending them in for testing/cleaning/testing to Witchunter Performance.

I've always just disconnected the Injector sub-harness from the main and sent it in with both injectors connected to the sub-harness.



.