Inde-Fab moving forward with EDGE products!

[Inde-Fab]

I have had such a great response from everyone that I am moving forward with my plans to build some sled products.

As stated in my other thread I will be using an edge chassis to base my first few parts from;

Front and rear bumpers-kinda like the skinz ones
Holz style front and rear suspension
Hood grille kit
aluminum oil-tank
dial-a jet kit
Complete a-arm tube chassis, hoping to use 600rr plastics...

I have had several offers for donor sleds and I will be starting the chassis as soon as one gets here. After building the RMK tube chassis I will be trying to do the same thing for the 600RR. What I'm thinking tho is If I can get the RR chassis here at the same time I can use RR a-arm geometry to base both bulkheads off so all my aftermarket arms/spindles will be interchangeable. I know these are coveted machines but maybe someone knows of one wadded up waiting for a future rebuild...I will ask in the RR forum too.

Thanks in advance, u guys have been very helpful!

 

[E-Zmoke 4:20]

Can't wait ~!

 

[ullose272]

i would really like a smaller more compact oil tank, what are your plans for the tanks?

 

[twoharbors380]

Got any pics of your stuff? Im interested

 

[Burr]

Glad things are moving ahead for you. If i were you i would start with all the smaller things that you have talked about in your other posts and then move on to the tube chassis. Start out a little small and work your way up. I very much want you to make it! I wish you were not so far away from were my 04 vertical escape is at. It has holtz drop and roll -u cooler-and there rear suspension with big wheel kit. It is the one with 3 fox floats shocks on it. I dont think they support it much any more. It works very well and i think you have talked to them about making it. It would be great to know that we could get parts for them.Sled also has fabcraft carbon fiber trailing arms holz radius arms. I still like this sled and give it as much use has my 09 dragon.I will try to help you any way i can.Good luck with your products.

 

[devilrmk]

i would really like a smaller more compact oil tank, what are your plans for the tanks?

I made my 3 quart tank thats on my turbo. Opens up a lot of space. Can not do a turbo without getting rid of that tank.

 

[ullose272]

I made my 3 quart tank thats on my turbo. Opens up a lot of space. Can not do a turbo without getting rid of that tank.

i would just make one too but i dont have access to an alluminum welder.

 

[Inde-Fab]

The tube chassis is def. down the list a-bit. If someone has dimensions for an oil-tank that works with turbo I'm down to build one NOW. Still working on the bumper/trying to make it work for the a-arm conversion...so close...
I was going to get the holz trailing arms going too but my guy with the donor set hasn't followed thru yet. so if anyone else has these and/or the rear skid/trailing arm setup they are willing to part with for a couple weeks please let me know!

THANKS AGAIN FOR ALL THE INPUT!
a couple pics of my offroad prototype stuff so u guys know I'm serious

 

[E-Zmoke 4:20]

Havn't heard of anything in a couple months are you still building stuff??

 

[Volvokvaloya]

Will you build any a-arm kit for the edge rmk?

I have lost the number of how many trailing arms i have pounded to dust the last 4 years