Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

  • Don't miss out on all the fun! Register on our forums to post and have added features! Membership levels include a FREE membership tier.

If this doesn't make it snow, what will?

T

theultrarider

Well-known member
I know, I should have started this project sooner. The way I see it, it is bound to snow now!!!


cityrace309225.jpg



I hate changing tunnels. Guess I should quit breaking them.
 
I always run with two spares. I hate to blow a belt early in a ride and have no spare....Makes you worry and wonder the rest of the day. I usually don't need them, just a habit I got into years ago. I broke a motor mount on my ultra years ago on a DEEP powder day up at lost lake. No towing that day. Took 6 belts to limp it out of there. With belt prices these days, I would have been money ahead to call in a chopper! :beer;
 
Good eye, 2 clicps on the inside belt, and one on the outer.
Break is over, back out to start putting it all back together again.:beer;
 
AK800VE said:
Damn Tim, what the heck you up to? lol
Click to expand...

My tunnel was cracked out in 3 places. There is no way it was goning to follow Doug another year without breaking in half. Speaking of following Doug, it is going back together with a different track and drivers for that very reason:D
 
theultrarider said:
My tunnel was cracked out in 3 places. There is no way it was goning to follow Doug another year without breaking in half. Speaking of following Doug, it is going back together with a different track and drivers for that very reason:D
Click to expand...

you dont have time to be taking pics...get back to work...and would you wash that thing...:face-icon-small-hap
 
Im with Mike.......get your old *** back to work!!!:D Why wash it the residual oil you can scrape togeather and start a fire with if you get stranded in the back country!!!;)
 
I hope you took pictures before you tore it apart or you will never get back together again. Hell, I guess if you can't figure it out I'll take a weekend and drive down and put it back together for you. If I do that though you have to ride your own machine to the top of the mountains this year. I am not putting your machine back together and getting it to the top every ride we go on this year..
 
AK800RMK151 said:
Im with Mike.......get your old *** back to work!!!:D Why wash it the residual oil you can scrape togeather and start a fire with if you get stranded in the back country!!!;)
Click to expand...

First we worry about the go part....Then we sorry about show....Nah, forget the show, I like sleepers:D
 
AK800RMK151 said:
Im with Mike.......get your old *** back to work!!!:D Why wash it the residual oil you can scrape togeather and start a fire with if you get stranded in the back country!!!;)
Click to expand...

looks like I have lots of time to get my sled back togeather from the looks of the mess on that shop floor.....almost looks like the aftermath of a train wreck....:eek:
 
AKSNOWRIDER said:
looks like I have lots of time to get my sled back togeather from the looks of the mess on that shop floor.....almost looks like the aftermath of a train wreck....:eek:
Click to expand...

I knew I was getting to catch h3ll from you about the floor as soon as I posted that pic. Almost deleted, cleaned up the floor and took another pic. What can I say. Just not enough hours in a day. You know how that one goes. I got the hard part done. Got them both apart, CLEANED UP, and the tunnel riveted back to the bulkhead and the foot wells back on. I sure wish my air riveter had picked a different time to die! That poor thing has pulled more rivets than I care to think about over the years. Time for a new one.
 
theultrarider said:
I knew I was getting to catch h3ll from you about the floor as soon as I posted that pic. Almost deleted, cleaned up the floor and took another pic. What can I say. Just not enough hours in a day. You know how that one goes. I got the hard part done. Got them both apart, CLEANED UP, and the tunnel riveted back to the bulkhead and the foot wells back on. I sure wish my air riveter had picked a different time to die! That poor thing has pulled more rivets than I care to think about over the years. Time for a new one.
Click to expand...

Your doing better then me..ended up sitting here all nite fixing a computer that crashed(one of the kids)...oh so fun...sounds like you got lots done today...:beer;
 
You must log in or register to reply here.

Similar threads

T
2024 KTM 450 XC-F fork springs are soft. what should I go to?
Replies
6
Views
2K
Sheetmetalfab
S
S
07 Phazer mtn lite questions
Replies
9
Views
273
MTN_VIPER
MTN_VIPER
C
New product for riding
Replies
6
Views
567
Crabr1
C
A
What will CAT do!! lack of dealers to do Recalls!!!
Replies
16
Views
711
kanedog
kanedog
C
Helmet wall/tabletop mount with fan
Replies
0
Views
115
Crabr1
C
Premium Features
Join Now Free!



Back
Top