I would like your help please w/putting..xcr800 into 06 IQ

[verticallychallanged]

I have the motor and i have the chassis. If you have done this or know someone who has could you steer me in the right direction on motors plates, and who did your pipe fit. I think I can figure the rest out. I live in NE oregon and could travel to washinton and idaho to get the work done. The IQ is an 06 600 and the motor is an 01 xcr 800. Now i know this could be costly but i cant let the motor jsut set there anymore.

Thanks, Jake

 

[xmr248]

XCR in IQ

I have the whole package that you need.. If you have any questions let me know.. there's only a few people around that can cut and fit pipes and do it the right way..

Steven Peterson
206-819-9696
Petersonsink@yahoo.com

 

[MBR44]

Here is a good thread on hcs that has lots of pics and info.
http://www.hardcoresledder.com/forums/index.php?showtopic=330657

 

[1200psi]

give me a call i can hook you up with what you need plate and pipes Brad 435 881 6665

 

[mattymac]

doug ruth in WA would be my first choice for pipe fitment if your unable to do it yourself.