i need a 18 degree flywheel

[ullose272]

if anyone has one i need a 18 deg flywheel for 800 ves. thanks. pm me

 

[likinit2]

That would be for a 02' ? If that is the case I have one..... I figured it out, so no I don't....... sorry about that...

 

[ullose272]

no 02 is odd ball 14 degree

 

[clutch man]

not an oddball just the old ignition before going to the what the carb models have now.

 

[north-land]

If you need the 18 degree flywheel for a PERC install, you can get your CDI reprogrammed for your 14 degree wheel for cheaper than new. I had Pro5 racing reprogram mine and it was one of the better performance mods I've had done to my 2002 700 edge.

 

[Mark's RMK]

What does the 14 vs. 18 degree denote? A wider range of pick up for the CDI to know crank position and is 18 req'd for PERC to work correctly? I've been changing flywheels when adding PERC.

When they reporgram the CDI does it just have a better map?

 

[ullose272]

my cdi wentbad and i picked up an 03 non perc non det cdi but it needs the 18 degree

 

[Mark's RMK]

Why would your non-perc non det cdi care? harness different?

 

[ullose272]

harness isnt different, it just need 18 deg instead of th2 14 of the 02, the new cdi id from an 03.

 

[Kraven]

OFFSET TIMING KEY

my cdi wentbad and i picked up an 03 non perc non det cdi but it needs the 18 degree

Why not just use a 4* offset timing key with the existing flywheel ???

 

[ullose272]

where can i pick one of those up?

 

[Kraven]

OFFSET TIMING KEY

where can i pick one of those up?

Bikeman, SLP, most aftermarket sled / ATV shops sell them

Arctic Cat and POLARIS should be the same in case there's not a seperate listing for POLARIS.

Hope this helps

 

[ullose272]

i cant seem to find a 4 degree, max ive seen is 3.5

 

[Kraven]

3.5 degree offset timing key.

i cant seem to find a 4 degree, max ive seen is 3.5

The 3.5* will work fine

there's more than a 1/2 degree inaccuracy in these things from the factory.

Think about it, Honestly, when's the last time you checked the timing on your sled?

If you think for a moment that the dealer checked it as part of the "$100.00 dealer prep" think again.

But the 3.5* key, pull the rope and go, you'll be fine.

 

[ullose272]

thats kinda what i was thinkin. thanks