Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

  • Don't miss out on all the fun! Register on our forums to post and have added features! Membership levels include a FREE membership tier.

I can help!!

BIG JOHN

Well-known member
Premium Member
lived/ate/worked the ZX to death...from the 1999 600 to the 2003 800HO...motors/tracks/tunnel ext/clutching etc...you name it, I did it...so plez call if you need any help...TY-BJ
 
ZX Sleds

What do you think about pipes on the 800HO motor?

04 motor w/Boysen reeds and rk tek 14/1 head. Stock other wise.
Ride at 5k to 8k feet.

Thanks
 
00' 700

lived/ate/worked the ZX to death...from the 1999 600 to the 2003 800HO...motors/tracks/tunnel ext/clutching etc...you name it, I did it...so plez call if you need any help...TY-BJ

I was wondering if you would have time to help set up my sled from clutching to motor work? It is currently stock besides Jaws twins and a diffrent base gasket for higher elevation. Considering your pistons, porting, eliminating oil pump, I have nitrous off my other sled I want hooked up and also a great all around clutch kit. Please help.
 
lived/ate/worked the ZX to death...
from the 1999 600 to the 2003 800HO...
motors/tracks/tunnel ext/clutching etc...
you name it, I did it...
so plez call if you need any help...
TY-BJ

:typing: Hi Big John !

I need some advice around my ZX sled :

Engine : 800H.O ( Manufactured in 2004 ).
Ignition : LOW Altitude ignition.
Exhaust : BRP OEM "Tight" Summit 800 H.O. pipe.
Muffler : SKINZ can.
Head : RKT 8040 13-1.
Piston : Wössner double ring pistons.
Intake : Boyesen rage cage with power wings.

Track : 15"x144"x1,75" Cross Country
Gearing today : 24/43 I also have a 22 sprocket that I vill test.
Clutching : Dynamoe Joe 800 kit.
23 grams pins.


The sled is like a gas pig and running sluggish and drinks alot of gas !! :frusty:
I'm not satifyed at all whit the gearing :frusty:

The clutches are eating drive belts for breakfeast
( I have floating secondary ). :frusty:

I have no crazy pull out of the hole !!! :frusty:


Can You Big John in any way help me out here ????
 
hand warmer wiring

I'm reassembling a 2000 summit 700 and can't figure out which wires go where on my hand warmers and thumb warmer switches? I have 7 female blade connectors coming from the short harness that has the d.e.s.s. on one end and on the other end, a large connector, a small 3 wire connector and these 7 single connectors.
 
Premium Features



Back
Top