Hyperfax...

[grubbn]

Need hyperfax for my nytro 153. The stock ones are smoked? Probably 8 or 10 rides on them. Track tension seams ok. Any one have any clues...

 

[MTdream]

everyone told me it is cuz I loosened the track...mine was same thing smoked after 231 miles...

I just ordered Hiperfax for mine, they are backordered through WPS right now, but might be in now, been travelling...

 

[Flainx]

If they are wearing at the front arch it is probably because your track is too tight. I went through a set in 100KM, loosed the track and have put on another 1000KM no problems

 

[grubbn]

If they are wearing at the front arch it is probably because your track is too tight. I went through a set in 100KM, loosed the track and have put on another 1000KM no problems

Ya right at the arch and there's even a damn wheel right there
I got about 2 fingers width at the lowest point. How loose can you run these? My first yammie

 

[powdermuncher]

Try the Yamaha graphite sliders.

No wheels no scratchers for 4 seasons one set lasts about 1500 miles if you pay a bit of attention on the brake in period. You can buy 4 sets of them for one set of Hiperfax and they last just as long per set.
Hiperfax is good but no magic bullet either I seen them melted as well

 

[grubbn]

Thanks guys Ill try the graphite ones and loosen the track up a bit.

 

[Butta]

Thanks guys Ill try the graphite ones and loosen the track up a bit.

Where would one find these? I see the regular plastic ones on the yamaha website, nothing about graphite models. Anyone point me in the right direction?

 

[powdermuncher]

Last year they had them in the Yamaha accessory catalogue.