How to scan codes with 2 button gauge?

[Blk88GT]

Does anyone know how? I was told it was under the settings menu, but I don't see any option for that.

Thanks in advance.

 

[caper11]

If your sled has a code it will pop up in the settings menu.
If there is no code there will be no code section in the settings menu.

 

[Blk88GT]

That's what I was beginning to think. Last ride out I had a check engine light on the trail on the way down. Restarting the sled cleared it and it ran fine but my curiosity was getting the best of me.

 

[Thielio20]

That's what I was beginning to think. Last ride out I had a check engine light on the trail on the way down. Restarting the sled cleared it and it ran fine but my curiosity was getting the best of me.

common codes I've gotten (not the actual code, but what it's referring to) are "brake engaged" (due to ice up), "low oil", "overheating temps", and "throttle stuck open" (due to ice up). In every circumstance they cleared themselves, but I was able to take it into Delta Powersports and they could read the list back to me to verify.

 

[Blk88GT]

I'm 99% sure it was nothing, but I'm going to scan it this weekend and see what the issue was. Could have been the brake, but I don't remember getting a CEL for that on my 19, but it had a different gauge with a light for the brake.

 

[Blk88GT]

BUDS says I've had 2 instances of P1429 - in case anyone is curious.

 

[caper11]

What code is that???

 

[Blk88GT]

Pipe temp sensor

 

[caper11]

Stock muffler???

 

[Blk88GT]

100% stock.