How do I remove clutch and mag?

[dfrank]

So I've got the bottom end sitting on my workbench with all the bolts that connect the two halves apart. It wont split open with the magneto and clutch still on it. I've got them unbolted, how do I get these parts to come off.

Probably should have done it while it was still on the sled...

Thanks

 

[JedInUtah]

For the clutch you need a clutch puller bolt.
For the mag, you lock up the crank and remove the big center nut. Then the flywheel comes off. Then the 3 or 4 gold colored Allen bolts on the magneto.

WATCH OUT, WHEN PULLING THE FLYWHEEL!! THERE IS AN INDEX KEY IN THE SHAFT YOU WON'T WANT TO LOSE.

 

[JedInUtah]

Oh yeah, you'll want to remove the the metal starter cup off the flywheel too.

 

[Snow Duck]

For the clutch you need a clutch puller bolt.
For the mag, you lock up the crank and remove the big center nut. Then the flywheel comes off. Then the 3 or 4 gold colored Allen bolts on the magneto.

WATCH OUT, WHEN PULLING THE FLYWHEEL!! THERE IS AN INDEX KEY IN THE SHAFT YOU WON'T WANT TO LOSE.

yes a clutch puller....i have never had any luck with the flywheel just comming off so you will need a puller for it as well....

 

[JedInUtah]

Good catch duckrider. Yes you will need a flywheel puller to remove the flywheel