Hot Dogger Mount

[mblanken881]

What size band clamp do I need to mount to a 2013 RMK 800?

Mike

 

[AZ800]

If you're mounting it to the pipe just past the Y about 6" dia. Get 2 and crank the piss out of them.
This is the best spot IMO. Not too hard to get to you can get your hand in there from the side and cooks food fast. Well under an hr to crisp up a cpl frozen hot pockets if you're riding hard.

 

[mtncat1]

get ahold of woodsrider on here he has the best mount bar none and the price is great

 

[diesel-powered-microwave]

Mntcat where can I get a cooker like that?
Thanks

 

[Ken Climb]

get ahold of woodsrider on here he has the best mount bar none and the price is great

The woods rider adapter is a "must have" item!

 

[200smk]

I gotta try mounting on the Y-pipe......mounting near the can doesn't cook nearly fast enough.....at least half the day!

 

[xc6rider]

I gotta try mounting on the Y-pipe......mounting near the can doesn't cook nearly fast enough.....at least half the day!

You must be a "brunch" fan

 

[RandyDomit@msn.com]

How to source woodsrider?

I'm having a difficult time finding woodsrider to order his adapter...any Idea's out there? thx

 

[sanderson]

Bob Bloomer 907-242-3681, bloomer@gci.net

 

[Woodsrider]

Mount kit for 600's

I now have mounting kits for 2012+ PRO RMK 600, also fits 2013 SWB, Adventure & Rush 600.
PM for more info.

 

[D8rider]

Hey woodrider pm you

 

[snosub]

I now have mounting kits for 2012+ PRO RMK 600, also fits 2013 SWB, Adventure & Rush 600.
PM for more info.

Woodsrider's kit is for MUFFPOTT not HOTDOGGERs. I have the kit with Muffpot on my SBA and it works good in the mountains but does take hours. I didn't work on the trails, I guess too much speed (air under hood) and not enough throttle.

 

[Deezy]

Purchased the 600 setup from Woodsrider and have his setup on my 800 as well. Fantastic setup and works great!

 

[whittaker727]

Wonder if that will work with my SLP pipe/can combo? The Can on that thing is HUGE!

 

[Merlin]

Wonder if that will work with my SLP pipe/can combo? The Can on that thing is HUGE!

I riveted the mounting base of my Hot Pot to the top of the SLP can on my '11 Pro. Had to flatten the ears on the mounting base first.

It works good..........A little too good if the machine is working hard! LOL

 

[gogglefurnace]

Well, I hooked up my muffpot on the pipe below the wye, after building quick release pins for my hood. Then I put the hotdogger on the can with 2 hoseclamps about 8 inches long. Run one clamp up the back spring loop, through the dogger mount. Put a master link on the front spring loop, I used a #60, screw the front clamp to the rear clamp, just under the dogger, loop it through the master link, double it back and rivet it, cut off excess and cinch down. Simple, cheap, removable, strong.

 

[kt19]

2Coolairvents makes a hood vent kit that allows you to put the cooker right on the pipe after the Y. cooks good and can do two in a day if you'd like. On the can takes all day just to get semi hot? Use 3 clamps! Doesn't move after that.

http://www.2coolairvents.com/airvents/Polaris/Images/DSC09475.JPG