Could someone show a picture of the CORRECT stock turbo solenoid hose routeing, this is for a 2012. All stock at the moment. Yes I saw EVOs TSB on this but I dont have their BOV. THANKS.
hose route
- Thread starter SwampCat
- Start date
Regardless of who's BOV, the hose to the valve must come off the middle port or the valve will not open when ecu commanded.
Hi, I have just installed the EVO Brv.
When I started the snowmobile now on idle speed, it blows out on the lowest barb on the brv solenoid. When I touch the throttle, it stops. Is this correct? It didnt do that before with the old routing.
I have routed it like Evo says it should be. Mine was routed wrong from factory. XF1100T 2012mod.
<!-- / message -->
<!-- controls -->
