I did not have the money to buy a skinz bumper so I made my own...
This is for a 09 dragon 800.
This is for a 09 dragon 800.
Homemade Bumper
- Thread starter j96simmons
- Start date
i made my own to out of half inch gas line pipe. its good up to a 3 inch round pine
Bumper
Nate, anything smaller than a beer can in diameter is considered traction.
Nate, anything smaller than a beer can in diameter is considered traction.
amen
Well I finally got around to making the plastic filler pieces that go on the sides of the aluminum bumper. Unlike the skinz filler plates that are just flat and leave a hole under them I cut pieces from a old junk belly pan then used a heat gun to bend them around the front and tuck em under the skid plate.
The last pic is of the skinz bumper and filler plates .
The last pic is of the skinz bumper and filler plates .
More pics
For some reason the forum will not let me post all five pics at once ... I get a error 404 file to large even after I down sized all of them to under a meg.
