holz spindles need help asap on install

[mcmarkrazz]

i recieved new spindles today but there was no extra bolts spacers ect included as there is shown on the web site...the bushings were included and that was all..can these be installed with useing the hareware from the stock spindles or do i need the tie rod spacers ect ??
http://www.holzracingproducts.com/shopping/snow_docs/HRP2113v2.3.pdf

 

[POLZIN]

stock hardware is used !

 

[Z-Man]

Stock upper bolt can be used. holz lower bolt is shorter and they come with two thin washers you need and you must have the pressed in spacer for the tie rod.