I'm thinking about installing a holtzman atcc on my 05 700 mod. Just wondering how well they work and if anyones had problems with them.
Holtzman atcc
- Thread starter Hostile 700 mod
- Start date
I asked about these a while back. Here's a link to the thread:
http://www.snowestonline.com/forum/showthread.php?t=177283
http://www.snowestonline.com/forum/showthread.php?t=177283
Looks like good info I'm gonna give it a try. Thanks
Holtzman ataac
I personally installed and have run these on my 2001 EDGE-X 600 and on my 2002 EDGE-X 800 for a combined total of almost 10,000 miles and I've installed them on 3 of my bud's sleds.
Increased throttle response, improved mileage, we usually ride at 1200' elevation, but every few years we ride out in Yellowstone 6400+'
all was good, did everything it claimed.
The only item I changed was rather that use the supplied "press in" fitting for the vacuum source in the top of the carb lid, I tapped the aluminum with an 1/8" pipe tap and used a brass barb fitting (auto parts or hardware store) just make sure it has a 3/16" I.D. (I spoke to Barry Holtzman about this and it DOES matter)
Hope this helps.
I personally installed and have run these on my 2001 EDGE-X 600 and on my 2002 EDGE-X 800 for a combined total of almost 10,000 miles and I've installed them on 3 of my bud's sleds.
Increased throttle response, improved mileage, we usually ride at 1200' elevation, but every few years we ride out in Yellowstone 6400+'
all was good, did everything it claimed.
The only item I changed was rather that use the supplied "press in" fitting for the vacuum source in the top of the carb lid, I tapped the aluminum with an 1/8" pipe tap and used a brass barb fitting (auto parts or hardware store) just make sure it has a 3/16" I.D. (I spoke to Barry Holtzman about this and it DOES matter)
Hope this helps.
