HO Cases needed

[bikerjustin]

Posted everywhere now.
2004 to 2006 800 HO cases needed
2007 to 2008 HO Ptek cases from mxz or blizzard or whatever will work too. Not the R engine
No cracks, welds, repairs. I already have a set of those.

 

[chumbilly1]

Do you not agree with welding cases? I am just gettin ready to weld a set.

 

[bikerjustin]

My weld cracked right away. I know there is a way to do it that will prevent the weld from failing but I am just going to buy a set that isn't cracked. Additionally, I had coolant get into my engine that caused hydrolock and made my crank come out of phase-I am guessing this had something to do with the bottom case warping during the welding process. I just spent about $500 rebuilding my crank last summer and it is now on its way back to get put back in phase and welded. After spending that money on the crank and then the additional money on the bigbore I want an engine that is going to work.
I know there is a lot of people that have had welded cases work just fine, I was one of the people that didn't.

 

[chumbilly1]

definately something to think about.

 

[Fack]

I've got a 2006 800HO complete motor I need to get rid of. It's got a couple hundred miles since it was professionally rebuilt. Shoot me a pm and let me know if you're interested.

-Fack