HELP!

[yooper 8]

I was just installing a skid plate for the quik drive on my PRO, and noticed that my front track shock is hanging completely free! The lower cross shaft that holds the bottom of the shock is GONE! Must have come out on my last ride. I have to have this sled working tomorrow for a big ride.....a buddy has a 2011 Assault that he blew up yesterday, which I can steal parts from. Does anyone know if the front cross shaft on the Assault is the same diameter/size as the RMK? Thank you!
Also, does it go in the upper hole or lower on the RMK?

 

[wjl]

The shaft diameter "should be the same as Polaris did not change shock configuration and all after market shocks list same 11 -13 for the rear.
Did you loose the whole set-up wheels, spacers, washers the whole thing.
I do not understand what you mean by upper hole? see picture my 2013 is that what you are looking for?

 

[yooper 8]

Thanks for the reply and pictures! Yes, everything is gone. The picture really helps, my skid is full of snow and I couldn't see the right holes....thought it was one of the other two just in front of the right one. Thanks a lot for the help!

 

[ak]

You can use the shaft and spacer off the assault, use the wheel and brackets off the assault also.

The 13 shaft on the pro is turned down on the edges more than the assault shaft to accept the small inner idler wheels.

Loctite those bolts when you put it back together.

 

[yooper 8]

will do! thanks much.