HELP replacing track

[DOOingitUtah]

Ski doo XP 154 ......ok....I have taken everything off for taking the track out but I am stuck on the drive shaft..... can't seem to get the brake side off....it seems to be press fitted with the bearings and the rotor for the brakes. Wondering if anyone has done this and could give me some tips getting frustrating

 

[Motley Doo]

Sorry, not really sure where you are talking about, did you pull the chaincase out?

 

[DOOingitUtah]

took the chain case side off and also have taken the brake side off.....apparently on the brake side you have to undo the whole brake caliper....it is press fitted on and wondered if anyone has done so....and has any clues on how to get it off so that we can pull the drive shaft out.

 

[crashleroux]

The brake caliper is part of the bearing mount, take the three bolts out under the rotor and then rotate the mount inside the tunnel to unlock it. It is cammed in there with three tabs. Once that is done it should come right out.