help pregameing my 700cfi install
- Thread starter 440dart
- Start date
T.P.S. and ENGINE ALIGNMENT
Take a look at the INCREASING YOUR IQ Thread
In there is my thread for engine alignment with pics as you do need the tool, to correctly set this, tool costs less that $50.00
There's also another thread I started TECH TIPS FOR 600/700/800 CFI's, Some T.P.S. info is in there as well
There's also a thread about T.P.S. (in the INCREASING YOUR IQ Thread) and in the 900 section there's a video
On the 600/700/800 CFI's, the throttle blades MUST BE FULLY CLOSED TO SET, then adjust to voltage spec posted, then open the idle speed screw to the voltage setting per spec for your sled.
All that info is in the thread
Hope this helps
well my parts are showing up today and iam just wondering if theres anything i should look at while its out?
is my tps fine all i did was unplug it? clutch alighnment can i do it without a tool?? if so please give step by step instructions thanks guys
Take a look at the INCREASING YOUR IQ Thread
In there is my thread for engine alignment with pics as you do need the tool, to correctly set this, tool costs less that $50.00
There's also another thread I started TECH TIPS FOR 600/700/800 CFI's, Some T.P.S. info is in there as well
There's also a thread about T.P.S. (in the INCREASING YOUR IQ Thread) and in the 900 section there's a video
On the 600/700/800 CFI's, the throttle blades MUST BE FULLY CLOSED TO SET, then adjust to voltage spec posted, then open the idle speed screw to the voltage setting per spec for your sled.
All that info is in the thread
Hope this helps
