HELP PLEASE!!!!

[scottyxf700]

I did a few upgradeson my 1100T. Cold air intake, and BRV valve. Have it all back together. When i turn key on dash doesnt light up and i dont hear the fuel pump cycle. The motorturns over though.
I have double and triple checked connections to ECU, but no avail.
Any help would be appreciated.

 

[RACINSTATION]

Plug hood plug back in (if it isn't)
Double check tether (if it is HCR or if you installed one)
Make sure stop switch is in run position

 

[RACINSTATION]

Just saw that you said the motor turns over-gotta be the tether.

 

[scottyxf700]

It has a tether, cats. I am digging into it. Thank you

 

[scottyxf700]

Tether has continuity on the wires when it is plugged in. Looks like all connectors aregood. Snap together and such..
No change

 

[Evolution Powersports]

I did a few upgradeson my 1100T. Cold air intake, and BRV valve. Have it all back together. When i turn key on dash doesnt light up and i dont hear the fuel pump cycle. The motorturns over though.
I have double and triple checked connections to ECU, but no avail.
Any help would be appreciated.

Completely disconnect the plugs to the ECU and reconnect them until you can hear the locking tabs click.

If you have a tether, I would look there next.

 

[scottyxf700]

Took tether apart, all looks good . I have continuity with it plugged in. Unplugged no continuity atthe connection... if i short cut tether, and plug red wire to green it still wont come on...?????

 

[shadow conspiracy]

Did you just install the tether? When I did mine I mixed the blue and purple wire up when intalling it.

 

[scottyxf700]

Installed it last year. I put tape on the wires, different when i pulled them apart so i wouldnt do that
Itsmy dumb luck. Havent rode my sled all winter and we are leaving town on Thurs. For a weekend trip.

 

[scottyxf700]

Different colored tape on each wire i meant

 

[scottyxf700]

Found it. One of the wires had a broken connection on the tether. Thank you for all the input