I just joined and wanted to say hello. I bought a 1989 ZRT 600 about 8 years ago and have had the normal bearing issues, and now I have a problem with the throttle. If I hit the throttle at an angle it will bog and backfire, so I looked at it and noticed the plastic washer was worn out, I replaced both the upper and lower washers, that fixed it for a while but I have the same issues of bogging out. I have read a couple of posting about disconnecting the kill switch and was woundering if I should just buy a new throttel swich for $75. Any thoughts on this would help alot.
Thanks
Thanks
