Having trouble tuning!!

[T&A1000]

I have an 07 M1000 with SLP exhaust, Timbersled intake and boondocker box. I am having troubles getting it tuned. Anybody have BD #s for 8000 to
10000 with a similar setup? Who makes an A/F guage? Maybe that might help. I'm just afraid of going too lean. Thanks in advance.

 

[Squeal]

Did you try SLP numbers?

 

[T&A1000]

Did you try SLP numbers?

I did try the SLP #s but I had a bad bog above 6400 rpm. Tried going both ways with the BD box and didn't see any change.

 

[sledstew]

may want to check your cables from the servo motor, Ive seen the cables come off the servo motor cusing it to bog on top since the power valves arent opening.

 

[T&A1000]

I checked the power valve cables. I check them pretty often because I acyually had one break last winter.

 

[Squeal]

I have an 07 with Speedwerx pipe. I have no bog. I have a NGK A/F, bought of ebay for less than $250.

Maybe try the Accel pump and shoot same extra gas in there around 6200rpm when the valves open.

Get the A/F so you can tune and not blow it up.


What numbers are you running?

 

[T&A1000]

I have an 07 with Speedwerx pipe. I have no bog. I have a NGK A/F, bought of ebay for less than $250.

Maybe try the Accel pump and shoot same extra gas in there around 6200rpm when the valves open.

Get the A/F so you can tune and not blow it up.


What numbers are you running?

Right now I'm running the numbers that SLP recommends. I'm looking for an A/F right now. Thanks