Handle Bar Riser/ cable extensions???Help???

[KidWalleye]

Does anyone have a package all set up. I just got an M1 and need roughly a 6'' riser and longer cables or just cable extensions. I would like to just buy them together if possible just wondering who has the best.

Gary

 

[BU1]

www.gravityworxracing.com

 

[TEcrossfire]

olesmachine.com, great product at a great price, he sells the risers and cable extensions together. However, you may have to do some wire extending and brake line extending with that height. Check him out, its a great product.

 

[Snoweasel]

Yes, here's another vote for Gravity Worx. They have the right stuff AND it's top quality.

 

[student driver]

Thanks for the recomendations guys.
I do have complete bar riser set ups on the sale page right now too at www.gravityworxracing.com

 

[neverenoughsnow]

riser and cable setup

gravity works racing is the place for rox risers, and they have extended cables. BE AWARE THAT THE SHIPPING MAY TAKE AWHILE , THEY TOOK CARE OF ME BUT I WOULD RATHER HAVE MY PRODUCT AS PROMISED.THE PRODUCTS ARE GREAT AND HIGH QUALITY BUT THEY NEED TO SHIP OUT IN 1 OR 2 BUSINESS DAYS

 

[Summertime Blues]

Another vote for Gravity Works!!

 

[student driver]

gravity works racing is the place for rox risers, and they have extended cables. BE AWARE THAT ....

Ya, that one had an issue on my end.
There was a problem with one of the parts coming to me, and since I own the company,
It's my responsibility to get it right or to make it right by you, the customer.
No one felt more crappy about that than I did.

Hey KidWalleye,
You are on the M-1000, That machine has a 54" throttle cable and it's routed under the motor.
Save a couple bucks there and re-route to the right side of the motor right along the wire loom and straight up your stearing post.
You will gain the inches that you need right there.
You will be needing a longer brake line though and I've got those in stock.
I've also got RSI Pivot risers in stock and on sale right now on my sale page at www.gravityworxracing.com/specials.html

 

[KidWalleye]

Risers

i pulled my handle bars off yesterday and put a four inch riser off of a different sled in there it was not the right one for my sled do i couold not bolt it in but, everything looked like it was going to be too short. so i started trouble shooting. brake line made a big bend down by the brake so i popped it out of the holder and got more than enuf line out of that. I couldnt get enuf out of throttle cable to be comfortabe with it but i will now look into runjning on left side.





Hey STUDENT DRIVER, I was thinking of going with a little taller riser maby 6'' but the electrical wires look like the could cause a problem then what is one to do about that? or is it not worth the couple more inches.



Gary

 

[RSI]

We have everything you need in stock at great prices. We even have the Gravity Worx throttle cables.

 

[student driver]

i pulled my handle bars off yesterday and put a four inch riser off of a different sled in there it was not the right one for my sled do i couold not bolt it in but, everything looked like it was going to be too short. so i started trouble shooting. brake line made a big bend down by the brake so i popped it out of the holder and got more than enuf line out of that. I couldnt get enuf out of throttle cable to be comfortabe with it but i will now look into runjning on left side.





Hey STUDENT DRIVER, I was thinking of going with a little taller riser maby 6'' but the electrical wires look like the could cause a problem then what is one to do about that? or is it not worth the couple more inches.



Gary

It is worth extending the electricals if that puts the bars up where comfortable.
Extend them 1 at a time to ensure that you do not get any mixed up.
I did this on my Dragon as well as the last 4 sleds.
It works and can be done very clean.
Wrap them up good when you are done and put a wire loom on them.

 

[KidWalleye]

Risers

I was talking about the risers more so then the cable and wire extensions.

How much would a 6'' help a person throw an M1000 around over a 4''. I had a 4'' in place and it seemed like it would work ok but would a 6’’ be significantly better.


What would it cost for all three extensions: brake line, throttle cable, electrical and the riser

Gary

 

[student driver]

64.95 for the RSI pivot risers, 12.00 for the adapter tube, 47.95 for the RSI brake lines, extend the wires your self with wire from auto parts store, and re-route the throttle cable from under the motor over to the right side of the motor for free.