Genesis 990 WTB

[sledhead122]

i am looking to buy an PSI Genesis 995 complete with a wireing harnes. If there are any out there for sale in the $1,000-$2,000 range i will be very interested

 

[clay hale]

have psi 950 genisis with electrical, pipes, carbs, for 1500 call
milo 208 681 5106

 

[sledhead122]

Will that bolt into my polaris and how much power does it have

got any pics

 

[clay hale]

you would need a polaris 440 or 500 motor mount(s) and then just drill holes in it. it has around 180 but if you turn the compression up the hp #s just keep goin up.

 

[clay hale]

it has dial-a-dome heads

 

[clay hale]

...

 

[snowslut]

I have a 995 with about 200 miles on it everything complete but wanting to get 3500 for it

 

[snakeye]

I have a 925 with new crank pistons line bore case halves and renic both cyc ready to go with pipes and wireing but want 3000 call 406 490 1572 went to a turbo putting sled back to stock for wife thanks

 

[sledhead122]

would you take 3000 for the 995
where are you located

 

[snowslut]

pending sale on the 995 I will let you know tomarrow

 

[snowslut]

sorry sold the motor with the sled

 

[Mountain Sled Shop]

995

I know where there is a 995 with some fresh parts in it. It is in butte mt @ bennys power toys. you could look up the # or I could find it for you. This is a complete engine compartment. good luck!!

 

[sledhead122]

would you accept 2500 for the 925 and where are you located

 

[mtnrider]

Ive got a fresh 925 I would sell for 2500. pm me back

 

[sledhead122]

mtn rider

does the 925 come complete with pipes, elestrical, carbs, ect.
would you take 2,000 for it--i would really like to round up a motor quick i blew a hole in the case of my 440 today

 

[tedn]

Genesis Motor in Butte MT.

I road with Mario with this motor in his sled. Great motor strong. contact him at 406 832-3259. It is all complete with pipes and every thing you need including motor mount for Polaris he had it in a 2001 RMK Good luck Tedn.

 

[Peetypaublo]

call me 541-910-05077

 

[tedn]

wrong #

Please post correct # Thanks Tedn.

 

[440rev]

I have a 990 crankshop polaris twin crankshop pipes & 50 lectrons crank is stroked by falicon $3000.00 firm shipped for everything

 

[440rev]

I have a 990 crankshop polaris twin crankshop pipes & 50 lectrons crank is stroked by falicon $3000.00 firm shipped for everything less than 3 tanks ran through it.built off a brand new 03 700, pro-x/ edge 91mm x 79.5 low 200hp 0r complete 02 pro-x with 136" factory hillcross rails polaris/boss seat