R
Polaris Gen II, Built in 2006.
Gen II 550 Bulkhead, this is the same bulkhead as used by CMX.
Bulkhead and tunnel raised 2" for additional track clearance.
RTI Tunnel with edge coolers, double pass rear cooler and bulkhead cooler.
RTI Billet chaincase with lightweight hyvo gears.
Wilwood Billet Brake Caliper, lightweight Wave Rotor.
Micro-Belmont Microloy 1-1/8" Jackshaft.
Micro-Belmont Titanium 1-1/8" Hex Drive Axle, 8 Tooth Avid Drivers.
Camoplast Extreme 2.5 X 15 X 162, 3" pitch track.
EZ-Ryde Rear Skid with Adjustable Fox Shocks.
Holz Ice Scratchers.
Holz Chromolly Trailing Arms, Swedged Alum Radius and Steering Rods, Fox Shocks.
CMX Titanium Bolt Kit on Front end.
CMX Alum Spindles.
Simmons Skis.
Boss High Rise Flat Top Seat with shovel pouch and Nos Compartment.
10.5 gal Clear Fuel Tank.
RTI Chromolyy Steering Post with Tison Pyramid Steering Hoop.
Fabcraft Bars with Hooks and Heated Grips.
Wilwood Master Cyl. with Billet Lever and Braided SS line.
Holz Billet Throttle Block.
Outlaw Composite Hood with Snow Screens.
Pia Halogen Lights.
1147 D&D Engine (Arctic Cat Based)
STM Billet Exhaust Valves.
CPC 48mm Carbs, Externally Adjustable.
Arctic Cat Ignition with CPC Throttle Position Sensor.
Jaws D Twin Pipes with Ceramic Coating.
Arctic Cat 6 Tower Primary with Ti Spring.
Arctic Cat Secondary with CPC Button Cover.
Avenger II Digital Gauge.
Choko Trail Pack Tool Bag.
Spare Belt 321-1065, New.
Very Light Sled, Approx. 430 lbs. Dry.
Very Good Condition. Clutching and Jetting Dialed in.
Arctic Cat Based D&D Engine Pulls Hard and is Completely Reliable.
Original Build Cost $30000.00
Asking $8900.00 O.B.O.
Would Consider Trade for 2011 Pro RMK 163.
Call 406 396 8928 with Questions or Offers.
No Reasonable Offer Refused.
Will Help with Delivery.
Gen II 550 Bulkhead, this is the same bulkhead as used by CMX.
Bulkhead and tunnel raised 2" for additional track clearance.
RTI Tunnel with edge coolers, double pass rear cooler and bulkhead cooler.
RTI Billet chaincase with lightweight hyvo gears.
Wilwood Billet Brake Caliper, lightweight Wave Rotor.
Micro-Belmont Microloy 1-1/8" Jackshaft.
Micro-Belmont Titanium 1-1/8" Hex Drive Axle, 8 Tooth Avid Drivers.
Camoplast Extreme 2.5 X 15 X 162, 3" pitch track.
EZ-Ryde Rear Skid with Adjustable Fox Shocks.
Holz Ice Scratchers.
Holz Chromolly Trailing Arms, Swedged Alum Radius and Steering Rods, Fox Shocks.
CMX Titanium Bolt Kit on Front end.
CMX Alum Spindles.
Simmons Skis.
Boss High Rise Flat Top Seat with shovel pouch and Nos Compartment.
10.5 gal Clear Fuel Tank.
RTI Chromolyy Steering Post with Tison Pyramid Steering Hoop.
Fabcraft Bars with Hooks and Heated Grips.
Wilwood Master Cyl. with Billet Lever and Braided SS line.
Holz Billet Throttle Block.
Outlaw Composite Hood with Snow Screens.
Pia Halogen Lights.
1147 D&D Engine (Arctic Cat Based)
STM Billet Exhaust Valves.
CPC 48mm Carbs, Externally Adjustable.
Arctic Cat Ignition with CPC Throttle Position Sensor.
Jaws D Twin Pipes with Ceramic Coating.
Arctic Cat 6 Tower Primary with Ti Spring.
Arctic Cat Secondary with CPC Button Cover.
Avenger II Digital Gauge.
Choko Trail Pack Tool Bag.
Spare Belt 321-1065, New.
Very Light Sled, Approx. 430 lbs. Dry.
Very Good Condition. Clutching and Jetting Dialed in.
Arctic Cat Based D&D Engine Pulls Hard and is Completely Reliable.
Original Build Cost $30000.00
Asking $8900.00 O.B.O.
Would Consider Trade for 2011 Pro RMK 163.
Call 406 396 8928 with Questions or Offers.
No Reasonable Offer Refused.
Will Help with Delivery.
