Gearing / clutching?

[jear bear]

I'm running a 04 800ve with a 162 pc 7 tooth drivers 19-41 gears Black and pink spring the full slp pipe set up I run at about 2000-5000 just looking for some suggestions on my clutching, gearing and jetting I like low end torque not concerned about doing 80 mph I got a 162 so I'm in it for the mountains thanks

 

[rmkforever]

I have an 05 rmk with 159 and I have 19-41 gears as well with slp race twins, I run about 3000 feet usually. Im running a black/green with 66 gram weights. and my secondary is stock for that year rmk. I was told if I was going to do more mountain riding to switch my secondary to a straight 36 helix and a red/black spring. For jetting im running 480-490 main depending on temps. That will change for you depending on your elevation and temp as well and may be different running a single pipe. Hope that helps out.

 

[winter brew]

Almond (140/330) primary spring, 10-64s.
58/38.46 w/ red/black and 1 or 2 delrin washers.
370-380 mains and needle in the middle... For slp single, go up 2 sizes if you have the standard SLP twins.