Gauge Lifter (updated with pic)

[PRsnowproducts]

Gauge Stand (updated with pic)

Would anyone be interested in this product.

 

[yz400ex]

Anymore info on this? Any different than what is already out there?

Sent from my Galaxy S3 using Tapatalk 2

 

[PRsnowproducts]

tring to upload a pic but i keep getting an error. pm me an email and i can give you more info and pics

 

[Snodawg]

I would like to see one that rotates the gauge but doesn't lift it. Keeps it nice and low to prevent damage when rolling the sled over with a low windshield.

 

[Proride_284]

I agree one that you can rotate/tilt down when on the trail and then be able to move up flat when standing

 

[bootz1981]

i got one last year from i think wildchild, it has a slot that gives you the choice of how high or low or in and out very nice sold the sled and dont have any pics

 

[PRsnowproducts]

Should have a pic up soon. If i can ever get it to load. The lifter does pivot up and down but not side to side. There is also a vent thats build into the base so when you do roll you dont pack snow through where the hole is but you can still get the hot air out

 

[die hard poo]

Use photobucket to upload your pic to the forum. Use the image code copy and paste it in the message. Works great!

 

[timber_tramp]

i got one last year from i think wildchild, it has a slot that gives you the choice of how high or low or in and out very nice sold the sled and dont have any pics

Wildchilds bracket works well.
I will buy another one for my new sled as well.
http://canadasledparts.com/cgi-bin/p/awtp-product-category.cgi?d=canada-sled-parts&pc=13469

 

[yz400ex]

I am posting this picture for PRsnowproducts. The gauge looks good, but is there any difference between this one and the others out there already?? If the price is right, I would be interested.

 

[PRsnowproducts]

There's not really a whole lot off different things you can do with this simple of a product except give it a cleaner fit and finish. Also one of our buddies bought someones last year (not going to name names) but the whole was bearly to big so he was constantly messing with it trying to keep the rubber seal and gauge in place. Not sure where everyone else is at on price but were at $55 and its gonna be roughly $5 to ship to lower 48.

 

[SpokaneRMK]

Looks like Wildchilds, good job.

 

[PRsnowproducts]

Not really. Its a lot closer to the polaris acc. program one. I just looked up wildchilds and it dont look like his pivots.

 

[lorne1176]

same as WRP

 

[High Velocity]

This is the one my buddies & I are using on our Pro's. Very solid and no issues after multiple roll overs.



Sent from my iPad when I should be fishing.

 

[wildchild]

Looks like Wildchilds, good job.


His is diffrent than mine.

Mine can be lowered to below the stock console hump so its protected, it can also be raised very high if needed. The bracket allows the gauge to be moved forward or backward , up and down.

www.canadasledparts.com

 

[Snodawg]

Looks like Wildchilds, good job.


His is diffrent than mine.

Mine can be lowered to below the stock console hump so its protected, it can also be raised very high if needed. The bracket allows the gauge to be moved forward or backward , up and down.

www.canadasledparts.com

So are you saying that your mount can be used with a low windshield and still have the gauge low enough to protect it?

 

[bootz1981]

wildchilds can be used with a low windshield no problem. it can be moved out and in about an inch and a half and up and down about the same. when its tilted and moved down its lower than stock i remeber worked great nice product. the pics on his website dont show the adjustments so it looks like the rest but it isnt

 

[t stone]

Anyone have more pics of Wildchilds guage lift? The pics on the web page dont show a side view very well. Thanks

Stone

 

[Oregonsledder]

Here is what I did with the Gaugelifter. I built a little bracket so it would be below the short windshield. It works great.