I built a schaeder valve into my fuel line that will let me test the fuel pressure on my pro. It is showing 65# when I tested it. The tester has the bleed line coming off of it and I put that into the tank vent. I was thinking that as it was idleing if I opened the bleeder and put the excess fuel back to the tank it would be simulating the extra flow the secondary injectors that the Silber kit use. Might help in troubleshooting problems some people are having if they dont have access to an extra fuel tank. Just a thought any input would be appreciated.
Sent from my Galaxy Nexus using Tapatalk 2
Sent from my Galaxy Nexus using Tapatalk 2
