FS: UBR900 ready for an IQ racer

[MBR44]

I have a complete union bay 900 based off a polaris 800 bottom. The bottom was checked for tolerances and a big bearing kit was installed at last rebuild for insurance purposes only. It has a fresh top end, new pistons and rings. The motor comes complete with bored tm 42mm mikuni rack carbs, cdi for 14 degree flywheel and chromed twin pipes cut and fit to an IQ racer with the headlight. It has a motor plate from power addictions fit to the racer with 6 motor mount locations including 1 ultra mount on the pto side plus a pto torque arm. 2 sets of heads and VF3 reeds. I prefer to keep together but I will seperate the motor and pipes if you only want the motor. I have straps for an edge chassis. Upgrading to a 1200wc. PM me your email address and I can send pics. $3800

Feel free to contact me with questions
Dan 989-370-3789

 

[MBR44]

Motor also fits into any polaris chassis.

 

[MBR44]

I recently put 35mm stingers on the pipes for my alt but also have 31.75mm original stingers. Curt at fasttrax has inserts to customize the stinger diameter.

 

[MBR44]

ttt

 

[MBR44]

top

 

[MBR46]

bump for ya....this is a solid running motor and will make someone quite happy beating on their buddies!