Looking to sell these all to a shop that does cranks and cylinders...
Cranks for CORE to be rebuilt:
1997-2005 Polaris 700 non-ves crankshaft with a bad pto rod bearing. All main bearings are smooth and tight. From a 99 RMK 600
2003.5 Arctic Cat 900 twin crankshaft with a bad pto rod bearing. All other bearings appear to be smooth and tight. I have not checked but it should be a 33mm pto end.
Cylinders for CORE to be replated:
(5) #824 Polaris 700 non-ves cylinders with just scoring. No broken bridges or ports
(1) #220 Polaris non-ves with a broken exhaust flange. Bolt stripped and broke the aluminum around the bolt threads. Bore is honed and clean with no damage! Could it be welded?
Cranks for CORE to be rebuilt:
1997-2005 Polaris 700 non-ves crankshaft with a bad pto rod bearing. All main bearings are smooth and tight. From a 99 RMK 600
2003.5 Arctic Cat 900 twin crankshaft with a bad pto rod bearing. All other bearings appear to be smooth and tight. I have not checked but it should be a 33mm pto end.
Cylinders for CORE to be replated:
(5) #824 Polaris 700 non-ves cylinders with just scoring. No broken bridges or ports
(1) #220 Polaris non-ves with a broken exhaust flange. Bolt stripped and broke the aluminum around the bolt threads. Bore is honed and clean with no damage! Could it be welded?
