FS: 2003 RX1 Mountain Turbo **Open to Offers**
Selling my project sled. This sled was orginally Holtz Racing Project sled in 2003. I bought it with about 1100 miles on it, has about 1500 on it now, Holtz racing products put custom tunnel (polairs design) on the sled. It has cooling water running up the outer edges of the running boards to big rear cooler. Many other Holtz Racing products on sled including steering shaft, rear bumper. Fabcraft handlebars and mountain bar with polaris brake controller. Billet Aluim a-arms built by Wild Horse Performance, Simons rear suspension built by Kirk Williamson, Lighting Pro Turbo with 48 mm HSR single carb with power valve. R&M Lighting hood and vent panels and Axcess seat. 162 X 15" X 2 1/2" 3.0 pitch modified paddle track, Lightweight battery relocated, Magnesium chaincase with reverse, Yamaha Primary with Hi-Tech performance 911 cover with belt adjuster and internal mods, Paragon secondary or Stock secondary (your choice), Fuel mixture gauge, electronic boost gauge, 8" Aluim rear suspension wheels, apex mountain skis and Lefty left hand throttle control and more. There were about 6 of these sled built, all of them were built at Donnie Williamson's shop in Preston ID and they are all awesome sleds.
I have only put about 125 miles on this sled each year for last 3 years. It is very fast, but is very driveable, it drives just like stock sled until get into the turbo. Have not weighted the sled but it is very light for a RX1. Good Mountain sled or could be shorted up to make it lake racer.
Must sell, just don't snowmobile like I used to. $20,000 plus invest, if you need a asking price would like to get $15,000.00 but come look and drive and than we will talk. May consider trade? Make me a reasonable offer.
email me at jpeterson@westriv.com for pictures or call 701-460-1270 Sled is located in central North Dakota.
Selling my project sled. This sled was orginally Holtz Racing Project sled in 2003. I bought it with about 1100 miles on it, has about 1500 on it now, Holtz racing products put custom tunnel (polairs design) on the sled. It has cooling water running up the outer edges of the running boards to big rear cooler. Many other Holtz Racing products on sled including steering shaft, rear bumper. Fabcraft handlebars and mountain bar with polaris brake controller. Billet Aluim a-arms built by Wild Horse Performance, Simons rear suspension built by Kirk Williamson, Lighting Pro Turbo with 48 mm HSR single carb with power valve. R&M Lighting hood and vent panels and Axcess seat. 162 X 15" X 2 1/2" 3.0 pitch modified paddle track, Lightweight battery relocated, Magnesium chaincase with reverse, Yamaha Primary with Hi-Tech performance 911 cover with belt adjuster and internal mods, Paragon secondary or Stock secondary (your choice), Fuel mixture gauge, electronic boost gauge, 8" Aluim rear suspension wheels, apex mountain skis and Lefty left hand throttle control and more. There were about 6 of these sled built, all of them were built at Donnie Williamson's shop in Preston ID and they are all awesome sleds.
I have only put about 125 miles on this sled each year for last 3 years. It is very fast, but is very driveable, it drives just like stock sled until get into the turbo. Have not weighted the sled but it is very light for a RX1. Good Mountain sled or could be shorted up to make it lake racer.
Must sell, just don't snowmobile like I used to. $20,000 plus invest, if you need a asking price would like to get $15,000.00 but come look and drive and than we will talk. May consider trade? Make me a reasonable offer.
email me at jpeterson@westriv.com for pictures or call 701-460-1270 Sled is located in central North Dakota.
Last edited:
