I am parting out my sled. It is a 03 mxz rev 800 blair morgain special.
the chassis is originally a 121" 440 race chassis, and has a 151" tunnel extension and skid setback. 440 nun, tunnel stiffeners.
chassis is in fair condition. it has had the front end rebuilt a few times, with a replacement front plate. clutch side has been bent back mostly straight and is reinforced behind the primary. still a slight kink in the front of the tunnel behind the can that should be straighened and reinforced. overall, not too bad..i've seen many revs waay worse. running boards are pretty straight. tunnel ext mount job is not the prettiest looking but is very functional. skid setback again not the prettiest but very functional. there is a slight stress crack in the tunnel support just behind the seat. overall though its not too bad, very functional.
i would take $400 for just the chassis with nun, tunnel, tunnel ext and cooler, pyramid supports and coolent hoses.
i still have many other parts and could build close to a "rolling chassis" for a package price. I will offer a screamin deal and bundle the skid, track, gas tank, seat, and remaining body panels for $750. if you want the chaincase w/ gears and jack and drive shaft with drivers thats another $100. i also have alot of other parts left and will heavily discount anything else for whoever buys the chassy
thats local pickup only...but if you are far away i would be willing to meet in idaho falls, rexburg, ashton, pinedale, dubois to take the edge off the drive.
the chassis is originally a 121" 440 race chassis, and has a 151" tunnel extension and skid setback. 440 nun, tunnel stiffeners.
chassis is in fair condition. it has had the front end rebuilt a few times, with a replacement front plate. clutch side has been bent back mostly straight and is reinforced behind the primary. still a slight kink in the front of the tunnel behind the can that should be straighened and reinforced. overall, not too bad..i've seen many revs waay worse. running boards are pretty straight. tunnel ext mount job is not the prettiest looking but is very functional. skid setback again not the prettiest but very functional. there is a slight stress crack in the tunnel support just behind the seat. overall though its not too bad, very functional.
i would take $400 for just the chassis with nun, tunnel, tunnel ext and cooler, pyramid supports and coolent hoses.
i still have many other parts and could build close to a "rolling chassis" for a package price. I will offer a screamin deal and bundle the skid, track, gas tank, seat, and remaining body panels for $750. if you want the chaincase w/ gears and jack and drive shaft with drivers thats another $100. i also have alot of other parts left and will heavily discount anything else for whoever buys the chassy
thats local pickup only...but if you are far away i would be willing to meet in idaho falls, rexburg, ashton, pinedale, dubois to take the edge off the drive.
