Front motor mounts?

[94fordguy]

One more question for you EDGE people... How in the heck do you replace the front motor mounts????? I managed to get the motor pulled no problem, but my front motor mounts are saturated in oil and need to be replaced, but how the heck do I do it? Do they just 'unscrew' if I grab them with a pipe wrench or what????

Help!!!!!!

Thanks again

 

[Super Dave3]

One more question for you EDGE people... How in the heck do you replace the front motor mounts????? I managed to get the motor pulled no problem, but my front motor mounts are saturated in oil and need to be replaced, but how the heck do I do it? Do they just 'unscrew' if I grab them with a pipe wrench or what????

Help!!!!!!

Thanks again

Polaris makes a special tool for removing them, They are threaded into the bulkhead. Dont use a pipe wrench you will damage them. If you look at the mount you should see three tabs on the bottom of the mount. You can use a hammer and punch on the tabs to remove them. Hope this makes sense.

 

[94fordguy]

That makes perfect sense... Thanks Dave

 

[94fordguy]

Got this taken care of today also, worked great, Thanks for the advice!

 

[NapaMatt]

AIR HAMMER IS YOUR FRIEND!!!

 

[whoisthatguy]

Don't forget to double nut the engine onto the front mounting bolts. Otherwise they will come loose and then you screw up your crankshaft bearings from the crankcase twisting.